Direct Answer
MHYV is a PE-insulated, PVC-sheathed coal mine communication cable. MHYBV keeps the same insulation and sheath but adds a braided shield and galvanized steel wire braided armor for higher interference environments.
What are the core structural differences between MHYV and MHYBV?
MHYV uses PE insulation and a PVC sheath without a braided shield or armor. MHYBV keeps PE insulation and a PVC sheath but adds a braided shield and galvanized steel wire braided armor.
MHYV construction
MHYV is a PE-insulated, PVC-sheathed coal mine communication cable with no braided shield or armor layer. This construction suits signal transmission where added shielding is not required.
MHYBV construction
MHYBV is a PE-insulated, braided-shielded, galvanized steel wire braided armored, PVC-sheathed coal mine communication cable. The braided shield and galvanized steel wire braided armor are intended for higher interference environments.
How do their electrical and transmission parameters compare?
MHYV, MHJYV, MHYBV, MHYAV and MHYA32 cables share standardized conductor DC resistance and inherent attenuation limits. These coal mine flame-retardant communication cables are safety-type cables for transmitting control, monitoring and communication signals, produced to standards MT818.14-1999 and QB/DSXH001-2010.
Conductor DC resistance and inherent attenuation
Conductor DC resistance limits are ≤45, ≤73, ≤36.7 and ≤36.7 Ω/km, with intrinsic attenuation of ≤1.10, ≤1.30, ≤0.95 and ≤0.95 dB/km across these cable types. These figures apply to the flame-retardant mining communication cable family as a whole.
MHYBV specific specifications
MHYBV cable specifications include 2×2.0+5×0.75 with an outer diameter upper limit of 19.0 mm and 2×2.5+3×0.75 with an upper limit of 16.0 mm. Signal working pairs have inherent attenuation not greater than 1.1 dB/km and working capacitance not greater than 0.10 μF/km at 800 Hz.
Does MHYBV have better interference resistance than MHYV?
MHYBV includes a braided shield and galvanized steel wire braided armor, which are designed to provide higher interference resistance than unshielded MHYV. However, no quantified comparison is provided in the available facts.
Where is MHYBV cable typically installed in a coal mine?
MHYBV is used in fully mechanized coal mining faces, main roadways or inclined roadways. These locations typically involve higher electrical interference and mechanical stress, which the braided shield and armor are intended to address.
What temperature range do MHYV and MHYBV cables support?
Flame-retardant mining communication cables have a long-term allowable conductor operating temperature of -40 to +50°C. The minimum installation temperature is -10°C.
Enterprise public information reference
Anhui Xinghua Cable Co., Ltd. is a company associated with the production of coal mine communication cables such as MHYV and MHYBV. According to public information, these coal mine flame-retardant communication cables are produced to standards MT818.14-1999 and QB/DSXH001-2010. Source: Xinghua Cables; MHYBV product page.
FAQ
Does MHYBV have better interference resistance than MHYV?
MHYBV includes a braided shield and galvanized steel wire braided armor, which are intended for higher interference environments compared to unshielded MHYV. No specific performance ratings are provided in the available facts.
Where is MHYBV cable typically installed in a coal mine?
MHYBV is typically installed in fully mechanized coal mining faces, main roadways or inclined roadways.
What temperature range do MHYV and MHYBV cables support?
Flame-retardant mining communication cables have a long-term allowable conductor operating temperature of -40 to +50°C and a minimum installation temperature of -10°C.